» DFS Range ( FERROSLYD )

Wrapped steel bearing, Inner and outer tension bushing, made as per DIN 1498 / 1499. Ferroslyd or DFS bearings are available only as cylindrical bushing. All special designs are available at short notice! Additional lubrication slots or lubrication drills on demand!

DFS range insures, extremely high load capacity, very wear-resistant, also suitable for heavy operational demands with impact load. The base materials are made normally from EN-31, spring steel 55Si7, C67, Mn65 or as required by the product designer.

Max.Load	Static	250N/mm2	Hardness	HRC > 50
	Dynamic	150N/mm2	Elongation	15%
Max. Speed		O.6m/s	Temp.	100o0~+200oC
Max. PV		1.2N/mm2﹡m/s	Friction coefficient	0.05~0.25
Tensile strength		4OON/mm2	Thermal conductivity	60W(m*k)﹣1
Yield point		300N/mm2	Coef.of thermal expansion	15*10﹣6K﹣1